Справочник Пользователя для Galaxy Metal Gear 65

Monitoring System Status

159

You can display the Galaxy 65 Subsystem’s hardware and configuration information. This is where you 
can see what version of the firmware you have. Technical support personnel may request this 
information.

You can display the hardware and configuration information two ways:

• Hardware information only

• Hardware and configuration information

Table 4–1

 lists the configuration information that is available. 

 

Configuration information (per SM)

HOST 0
HOST 1

Active 
Channel

Speed—1 Gb/s or 2 Gb/s 
as set in the Disk Array 
Administrator software.

Topology

Loop or Point-to-Point as 
set in the Disk Array 
Administrator software.

Node WWN  FC World Wide Name for 

node.

Port WWN 

FC World Wide Name for 
port.

Loop ID 

SOFT or a specific 
number as set in the Disk 
Array Administrator 
software.

Current Loop 
ID

Currently assigned 
value or Inactive if the 
FC link is not active.

FC Addr 

24-bit FC address or None 
if the FC link is not active.

AL_PA Currently 

assigned 

value or None if the FC 
link is not active.

CAPI LUN

NONE or specific number 
as set in the Disk Array 
Administrator software.