Справочник Пользователя для Galaxy Metal Gear 65

Galaxy 65 User Guide

58

You can also set it to NONE, which tells the Galaxy 65 Subsystem not to present a LUN for this EMP 
under the Galaxy 65 Subsystem’s target ID.

You can set LUNs for EMPs that you plan to add by assigning a LUN to the EMP ID you want to use. The 
Galaxy 65 Subsystem assigns EMP IDs sequentially each time it starts.

EMP LUN settings have no effect on the CAPI interface, which always allows communication with all of 
the EMPs connected to the Galaxy 65 Subsystem.

You may want to change the EMP LUN if it conflicts with the LUN of another device.

From SAM, select Manage Galaxy 65 Subsystem > General Config > Enclosure Management.

The Enclosure Management page displays. The Set Galaxy 65 EMP LUNs panels display the current 
LUN for each EMP. Each EMP has an EMP number that the Galaxy 65 Subsystem assigns sequentially 
whenever it starts.

Select the LUN you want for each EMP.

Click Update EMP Configuration.

You can change four additional EMP settings:

• EMP Polling Rate: This is the interval, in seconds, that the Galaxy 65 Subsystem polls the EMPs 

for status changes. If the polling rate is set to zero, the Galaxy 65 Subsystem does not communicate 
with the EMP. Only use this setting if you suspect you are having communication problems with the 
EMP. The default setting is five seconds. 

From SAM, select Manage Galaxy 65 Subsystem > General Config > Enclosure Management.
The Enclosure Management page displays. 

In the Enclosure Management Processor General Settings panel, select EMP Polling Rate.

Click Update EMP Configuration