Справочник Пользователя для Galaxy Metal Gear 65

Скачать
Страница из 258
Galaxy 65 Troubleshooting
75
7.12.6 Drive Carrier Module
Please see the Galaxy 65 Getting Started Manual (P/N 44521-01A) for information on the initial 
installation of the plug-in modules in the Galaxy 65 enclosure.
Warning
Observe all conventional ESD precautions when handling Galaxy 65 modules and components. 
Avoid contact with backplane components and module connectors, etc.
7.12.6.1
Removal and Replacement
Caution
Drive spin down
Damage can occur to a drive if it is removed while still spinning. If possible use the operating system to 
spindown the drives prior to removal. If this is not possible we recommend that you perform All steps of 
the following procedure to ensure that the drive has stopped prior to removal:
1
Release the carrier handle, by pressing the latch in the handle towards the right
Note
The anti-tamper lock must be off.
2
Gently withdraw the Drive Carrier module approximately1 inch (25mm) and wait 30 seconds.
3
Withdraw the module from the drive bay and fit a replacement module in accordance with the instructions 
in the Galaxy 65 Getting Started Manual (P/N 44521-01A).
7.13 Problems During Startup (When 
Using the Disk Array Administrator)
The following sections describe problems you might encounter when using the Disk Array Administrator 
during Power On Self-Test (POST) or during startup and explain how to resolve those problems. POST 
shows problems related to the processor, logic, and memory.
Figure 7–8
Storage Manager Module - Battery Assembly Location 
BATTERY ASSEMBLY
BATTERY
LEAD
LATCH
LATCH
Li-ion BATTERY
Storage Manager
Top View
Storage Manager
Side View
(LH Frame 
removed)