Справочник Пользователя для Epson PowerLite 1705c

If the password is not correct, you see a message prompting you to 
re-enter the password. If you enter an incorrect password three times 
in succession, you see the message 

The projector’s operation will be 

locked. Request code xxxxx

 and the projector switches to standby 

mode for approximately 5 minutes. Write down the request code. 
Then disconnect the projector’s power cord from the electrical outlet, 
reconnect it, and turn the projector back on. 

When you see the Password Protect Release screen again, you can try 
to enter the correct password.

If you enter an incorrect password 30 times in succession, the 
projector remains locked and you must contact Epson to unlock it. 

If you have forgotten the password, contact Epson with the request 
code number that appears in the Password Protect Release screen for 
assistance. See “Where To Get Help” on page 168.

You can transfer any image from your computer or video source to the 
projector and then use it as your startup screen. You can also use it as 
the screen displayed when the projector is not receiving a signal or 
when you press the 

A/V Mute

 button. The image can be a company 

logo, slogan, photograph, or any other image you want to use. 

Start by displaying the image you want to use from either a computer 
or video source, such as a DVD player or digital camera. Then follow 
these steps to capture the image and transfer it to the projector: 

1. Press the 

Menu

 button on the remote control, highlight the 

Extended 

menu, and press 

Enter

.