Руководство По Работе для Epson BrightLink Pro 1410Wi Meeting Room Productivity Tool with Wall Mount

Is the network cable connected correctly?

Check that the network cable is securely connected.

Are the computer's LAN card and the built-in LAN function 
available?

Check that LAN is valid by checking the device manager under Control Panel - System - Hardware.

Is the DHCP function for Wired LAN turned On?

Turn off the DHCP setting for Wired LAN from the Configuration Menu. 

When DHCP is set to ON in Advanced Connection Mode, if an available DHCP server is not found, it 
may take a while to enter LAN standby status.

See your projector User’s Guide for details on the projector's wired LAN settings.

Are connection denial functions, such as MAC Address 
restrictions and port restrictions, set correctly at the 
access point?

Set the projector to allow connections from the access point.

Are the IP address, the subnet mask, and the gateway 
address for the access point and the projector set 
correctly?

When not using a DHCP, adjust each setting.

Is the Network Configuration screen displayed on the 
projector?

Close network settings on the projector, and return to the LAN standby screen. If the Network 
Configuration screen is displayed on the projector, you cannot connect using EasyMP Multi PC 
Projection.

Is the firewall turned off, or has the firewall been 
registered as an exception?

When you do not wish to turn off the firewall or register the firewall as an exception, make the 
necessary settings to open the ports.

The ports used by EasyMP Multi PC Projection are "3620", "3621", and "3629".

Was the network adapter being used selected correctly 
with EasyMP Multi PC Projection?

If the computer has multiple LAN environments, it cannot connect unless the network adapter is 
selected correctly. When using a computer running Windows, start EasyMP Multi PC Projection, and 
select the network adapter you are using from Switch LAN in Set options.

s