Справочник Пользователя для Emerson Dual Conversion Online UPS GXT3-6000RT208

Do NOT attempt to start the UPS, turn on any circuit breaker or energize the input power until 

instructed to do so in 8.2 - Initial Startup and Electrical Checks.
Visually inspect the UPS for shipping damage. Report any damage to the carrier and your local dealer 

or Emerson representative.

Install the Liebert

®

 GXT3

™

 indoors in a controlled environment, where it cannot be accidentally 

turned off. Place it where air flows unrestricted around the unit. The installation location must be 

free of water, flammable liquids, gases, corrosives and conductive contaminants. Maintain a mini-

mum clearance of 100mm (4 inches) in the front and rear of the UPS. Maintain an ambient tempera-

ture range of 0 to 40°C (32 -104°F).

The Liebert GXT3 may be installed in either a tower configuration or in a rack, depending on avail-

able space and use considerations. Determine the type of installation and follow the appropriate 

instructions in either 5.1.1 - Tower UPS Installation or 5.1.2 - Rack-Mount UPS Installation.

To install the Liebert GXT3 as a tower:
1. Take the support bases out of the accessories bag (see Figure 9).

2. If optional Liebert external battery cabinets will be connected to the Liebert GXT3, take out the 

spacers shipped with the battery cabinet.

3. Connect the spacers and the support bases as shown in Figure 9. Each Liebert GXT3 needs two 

assembled support bases, one in the front and one in the rear.

4. Adjust the direction of the operation and display panel and logo on the Liebert GXT3.

a. Remove the front plastic bezel cover as shown in Figure 10.

The UPS is heavy (see 12.0 - Specifications). Take proper precautions when lifting 

or moving it.