Справочник Пользователя для Emerson Dual Conversion Online UPS GXT3-6000RT208

This manual contains important safety instructions. Read all safety and operating instructions before 

operating the uninterruptible power system (UPS). Adhere to all warnings on the unit and in this 

manual. Follow all operating and user instructions. This equipment can be operated by individuals 

without previous training.
This product is designed for commercial/industrial use only. It is not intended for use with life support 

and other designated “critical” devices. Maximum load must not exceed that shown on the UPS rating 

label. The UPS is designed for data processing equipment. If uncertain, consult your dealer or local 

Emerson Network Power representative.
This UPS is designed for use on a properly grounded (earthed), 100/200, 110/220, 115/230, 

120/208,120/240 or 127/220VAC, 50 or 60Hz supply. The factory default setting is 120/208VAC, 60Hz. 

Installation instructions and warning notices are in this manual.
The Liebert

®

 GXT3

™

 208VAC 5000 - 10000 is designed for use with a four-wire input (L1, L2, N, G).

The Liebert GXT3-6000RTL630

™

 is designed be used with a three-wire, two-phase utility source 

(L1, L2, G).

The battery can present a risk of electrical shock and high short circuit current. The following 

precautions should be observed when replacing the battery pack:
• Wear rubber gloves and boots
• Remove rings, watches and other metal objects.
• Use tools with insulated handles.
• Do not lay tools or other metal objects on the batteries.
• If the battery kit is damaged in any way or shows signs of leakage, contact your local Emer-

son representative immediately.

• Do not dispose of batteries in a fire. The batteries may explode.
• Handle, transport and recycle batteries in accordance with local regulations.

Although the Liebert GXT3 has been designed and manufactured to ensure personal safety, 

improper use can result in electrical shock or fire. To ensure safety, observe the following 

precautions:
• Turn Off and unplug the Liebert GXT3 before cleaning it.
• Clean the UPS with a dry cloth. Do not use liquid or aerosol cleaners.
• Never block or insert any objects into the ventilation holes or other openings of the UPS.
• Do not place the Liebert GXT3 power cord where it might be damaged.