Справочник Пользователя для Emerson FTA1100

NOTE:  The list of available options and the settings associated with them will vary with each controller.  Listed below 
are the most common user defi ned settings that may appear.

1

Use                 arrows to enable or disable the audible alarm for selected option.  Press            to confi rm.

1

Use                 arrows to enable or disable the common alarm output (ALR relay) for selected option.  
Press            to confi rm.

1

Use                 arrows to select the alarm output relay for selected option (Disabled, PTR (Pump Room Trouble), ETR (En-
gine Trouble), Both PTR and ETR).  Press            to confi rm.

The Event Log is a record of events (pressure recording, alarms, starts, etc...) that are stored in the memory of the 
Mark II

XG

.  The last 3000 events are kept in this memory.  The events are stored in the order that they occur, with the 

most recent being “fi rst” (the last event that occurred will be event #1).  The following keys are used to browse through 
the event log:

Move forward through the events one at a time (1 - 2 - 3....etc)
Move backward through the events one at a time (55 - 54 - 53....etc)
Move forward through the events ten at a time (60 - 70 - 80....etc)
Move backward through the events ten at a time (91 - 81 - 71....etc)

Pressing and holding of the arrow keys will allow the scrolling to move faster.

The Data History is a record of important data and events that are kept throughout the life of the controller.
Use                 arrows to scroll through the information stored in the Data History log.  The available information is:
Numbers of calls to start  • Number of actual starts • Pump total run time • Pump last run time • Total controller 
power on time • Last pump start time/date • Minimum system pressure • Maximum system pressure • Last high 
temp. alarm time/date • Last low oil pressure time/date • Last low fuel level time/date • Last charger failure time/
date • Last battery trouble time/date • Last engine overspeed time/date • Battery 1 & 2 voltage min/current/max • 
Battery 1 & 2 amps min/current/max

1

Use                 arrows to enable or disable the Save to USB function.  Press            to confi rm.
The following is saved to the USB fl ash drive:  Event Log, Data History, Controller Information and all user defi ned 
settings (pressure settings, timer settings, alarm settings....etc.).  The saved fi le is a text fi le named the same as the 
controller serial number (87654321.txt) and can be viewed using most word processing software. 

14

1

Use                 arrows to enable or disable the audible alarm for High Reservoir Level.  Press            to confi rm.

1

Use                 arrows to enable or disable the common alarm output (ALR relay) for High Reservoir Level.  
Press            to confi rm.

1

Use                 arrows to select the alarm output relay for High Reservoir Level (Disabled, PTR (Pump Room Trouble), ETR 
(Engine Trouble), Both PTR and ETR).  Press            to confi rm.