Справочник Пользователя для Eicon Networks V8.3

•

Support for CAPI-based applications through CAPI 2032.DLL and CAPI 20.DLL (32-bit 
and 16-bit versions) for Windows 2000, Windows XP, or Windows Server 2003

•

Support for TAPI-based applications through the Diva Server Telephony Service 
Provider (TSP)

•

Support for all known switch types (ISDN protocols) 

•

Support for Q-Sig protocol (see 

•

Additional security through support of RSA

•

Interfaces: RAS WMP, modem emulation, CAPI, Diva Server TSP

•

Compatible to V.22 Fast Connect

TM

 terminals with V.22 Diva

TM

 Fast Setup via Port driver

•

M-Adapter: 

• Middleware between Diva Server adapters and interfaces (CAPI, COM port)

• Can group several Diva Server adapters and specific lines of any Diva Server 4BRI 

adapter and abstract them as one adapter to the application (see ‘Combined 
Adapter’ in the Diva Server Configuration Manager Online Help (DSMain.chm)). 
Separate configuration of each individual line of any Diva Server 4BRI, V-2PRI, 
and V-4PRI adapter

•

Selectable call direction for each port of a Diva Server Analog or V-Analog adapter

•

Support for Windows XP Professional 64-bit and Windows Server 2003 64-bit

Note:  Diva Server for Windows - 64-bit supports RAS, CAPI, TAPI and SNMP service

Note:  Diva Server SoftIP can only be installed on 32-bit operating systems

•

Diva Server V-2PRI/E1/T1 and Diva Server V-4PRI/E1/T1: Creation of a trace message 
in the trace file if max. operation temperature is exceeded

•

Support for IP and TDM hybrid installations by using Diva Server SoftIP (v2.1 or higher 
enables fast data transfer using DMA (Direct Memory Access) procedures)

•

Support for collecting phone number ranges or a specific number by the adapter with 
incoming calls

•

Support for a wide range of Windows event logs. Driver and connection errors and 
informative messages are listed in the MOM (Microsoft Operation Manager). For a 
detailed description of the errors and messages see Diva Server Configuration Online 
Help (DSMain.chm)

•

Possibility to configure either the use of call deflection or call rerouting

•

Support for redirecting number emulation (for incoming calls). In this case the called 
party number is delivered as redirecting number to the application

•

ECT Link Balance - to avoid confusion with call transfer and mutiple incoming calls, 
each incoming call is delivered to a seperate TEI. This feature is only valid for BRI 
adapters and Point-to-Multipoint