Справочник Пользователя для EE Brightbox
EE Bright Box User Manual
142
10. Do not change the ‘Schedule Rule’ option, leave it as ‘Always Blocking’ and click Save
Settings:
11. The access control rule has now been created and enabled and appears in the filtering
table.
12. You can delete the access control filtering rule at any time by clicking the delete link
next to the rule in the table. You can also change the rule description, client IP address
range or client device services by clicking the edit link.
range or client device services by clicking the edit link.
If you want to block a particular application that is not listed in the ‘client device service’
list, you can do this in the ‘user define service’ section on the Edit Device Filtering Rule
page. You can configure up to 5 different ranges of ports to be blocked for either TCP or UDP
traffic. Please refer to your software instructions or user manual for information on the ports
that are used and need to be blocked. In the example below we have blocked port ranges
200-213 and port 1500 for TCP traffic:
page. You can configure up to 5 different ranges of ports to be blocked for either TCP or UDP
traffic. Please refer to your software instructions or user manual for information on the ports
that are used and need to be blocked. In the example below we have blocked port ranges
200-213 and port 1500 for TCP traffic: