Справочник Пользователя для Echo EN55022
Echo LANlink Router Option User Manual
Issue 1.0
04 December 1997 Page 14 of 59
Figure 8 shows an example timeslot set-up with 512Kbps allocated to channel 1,
320Kbps allocated to channel 2, and 1152Kbps allocated to the router.
320Kbps allocated to channel 2, and 1152Kbps allocated to the router.
2 MEGABIT E1 MULTIPLEXER V1.04
================================ 00:00 25/12/97 ===============================
Main Link (UK) : SYNCHRONISED Exit to Router:
Mode : NORMAL * Nx64 Channels : 2 + ROUTER
Framing : CRC4 D&I Channels : NOT FITTED
Idle Bandwidth : 0K Alarms : None
Clock Reference : INTERNAL Statistics : Main Link
Configuration :>LOCAL Events : Log
================================ 00:00 25/12/97 ===============================
Main Link (UK) : SYNCHRONISED Exit to Router:
Mode : NORMAL * Nx64 Channels : 2 + ROUTER
Framing : CRC4 D&I Channels : NOT FITTED
Idle Bandwidth : 0K Alarms : None
Clock Reference : INTERNAL Statistics : Main Link
Configuration :>LOCAL Events : Log
Nx64 Channel : 1 2 ROUTER
Rate : 512K 320K 1152K
Mode : NORMAL NORMAL
Tx Clock : INT INT
Rx Clock : INT INT
Indicate : ON ON
Control : ON ON
------------------------TIMESLOT MAP---------------------------
0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
---------------------------------------------------------------
S R 1 R 1 R R 2 2 R R R R R R R R R R R 1 1 1 1 1 1 R R R 2 2 2
Cursor keys to move, CTRL-U to save, ESC to abandon
===============================================================================
Use <SPACEBAR>/<+>/<-> to select
Rate : 512K 320K 1152K
Mode : NORMAL NORMAL
Tx Clock : INT INT
Rx Clock : INT INT
Indicate : ON ON
Control : ON ON
------------------------TIMESLOT MAP---------------------------
0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
---------------------------------------------------------------
S R 1 R 1 R R 2 2 R R R R R R R R R R R 1 1 1 1 1 1 R R R 2 2 2
Cursor keys to move, CTRL-U to save, ESC to abandon
===============================================================================
Use <SPACEBAR>/<+>/<-> to select
Figure 8
Example Timeslot Set-up
2.5.2 Returning to the Main Menu Screen
Selecting the Exit to Router menu option will return the user back to the
main menu screen. If any unsaved changes have been left, a prompt will
appear to confirm the action, as any unsaved changes will be lost after
leaving the multiplexer management page.
main menu screen. If any unsaved changes have been left, a prompt will
appear to confirm the action, as any unsaved changes will be lost after
leaving the multiplexer management page.
2.5.3 Clearing the Configuration back to Factory Default
The multiplexer may be reset back to the factory default configuration by
pressing CTRL-R four times when the cursor is on the Configuration item. A
confirm message will be displayed before the configuration is reset. The
previous configuration will be lost.
pressing CTRL-R four times when the cursor is on the Configuration item. A
confirm message will be displayed before the configuration is reset. The
previous configuration will be lost.
2.6 System Status
The main menu SYSTEM STATUS item displays the alarm status of the
overall system. Selecting this item gives the status of all the alarms in the
system as detailed below. Note the router monitors the alarm status of the
multiplexer and therefore the alarms have to be configured under multiplexer
management to be valid.
overall system. Selecting this item gives the status of all the alarms in the
system as detailed below. Note the router monitors the alarm status of the
multiplexer and therefore the alarms have to be configured under multiplexer
management to be valid.