Справочник Пользователя для Echo EN55022

Echo LANlink Router Option User Manual

Issue 1.0

04 December 1997 Page 27 of 59

This table displays the IPX services in the IPX SAP table. Information in this
table comes from three sources:

1.  IPX SAP Packets received from the Ethernet Port.
2.  IPX SAP Packets received from the WAN port.
3.  Static entries entered by the user.

The user can define up to 16 static routes in this table.  The simplest means
to allow the router to 'learn' available services is to use IPX SAP Receive.
For configuration see the Ethernet Service Setup section.  The user can then
highlight all services to be made static using the cursor and press <return>.
The user will be prompted to either delete the entry or make it part of the IPX
SAP table.  Turning off IPX SAP Receive as before will cause other learned
services to age out after about four minutes.

TYPE

Server identification number, defined
by IPX e.g. file server: 4, print server:
47.

NETWORK

Server network number.

SERVICE

The service that must be used to
reach a specified Network.

NODE

Server node address.

SOCKET

Node address socket number used to
access the server.

HOPS

Number of hops in the preferred route
to this server.

TIMER

Time interval in seconds, since this
routing entry was last updated.  For
the attached Network, this will be left
blank.

NAME

This will display the time in seconds
since the routing entry was last
updated.  For the attached Network
this will be left blank.