Справочник Пользователя для CyberHome Entertainment CH-DVD 452

SPDIF / RAW: Digital Coding of one to six channels (5 plus 1) in a bitstream
(Dolby Digital). If you would like to enjoy the effect of DVD 5.1, please select
SPDIF / RAW. Generally, this setting is used with receivers capable of Dolby
Digital 5.1 channel decoding.

SPDIF / PCM: PCM (Pulse Code Modulation). The description of the PCM
sound of DVDs corresponds to the CD system, but with a higher reading rate
(48 kHz, 96 kHz also possible). Alternatively, audio for most films is stored as
discrete, multi-channel surround sound using Dolby Digital audio compression
similar to the digital surround sound formats used in theatres. Generally, this
setting is reserved for two channel equipments.

Use this setting when playing CDs and VCDs that offer only Mono audio tracks.
There are the following setup possibilities:

Stereo: Sets the stereo signal.

Mono left: There will only be output of the left signal on the left and right loud-
speaker.

Mono right: There will only be output of the right signal on the left and right
loudspeaker.

Mono mixed: The left and right signal will be mixed  and put out mixed on the
left and right loudspeaker.

In this menu you can set the Dynamic Range. This option is sometimes called
“midnight mode”. The Dynamic Range Control aims to make watching a movie
at low volumes more enjoyable by booting the quieter sounds while suppress-
ing the louder sounds. Use the buttons “

” or “

” to adjust this mode from

“Off” to “Full”.

Highlight the menu point you would like to set in the “Security” menu. Please
press “ENTER” or the right direction button to enter a menu. Use the button
“

”or “

” to select the required setting and press  “ENTER” to confirm your

selection. You can leave the menu at any time by pressing the button “

” on

your remote control.

Note: You must completely stop the player by pressing the Stop button twice to
change the security settings.