Справочник Пользователя для Crane Merchandising Systems Hot Beverage Maker 670

November, 2002

Page - 44

6700001

a. At any of the preceding displays, you can press 

  to test

throw that item.

b. At any of the preceding displays, you can press * or # (on the se-
lection switch panel) to step through a list of that item’s throw times
for other selections where that item is active.  For example, pressing
# at the 

WAT. A display will show the throw time for WAT. B.  This is

a handy way to move from one selection to another without going to
the 

SETUP screen first.

If you try to set up a selection that is not configured, the
SETUP screen will remain in the display.

5. Continue.

1. Press 

  then

  until the display shows 

SET 202 °F .

In this example, 202° is the water tank temperature setpoint in de-
grees Fahrenheit.  If a decimal point appears next to the “F”, the
heater is on.

2. If desired, enter a new setpoint in the accepted range of  149° - 205° F

(65° - 96° C).

3. To change display units (replace the “F” with a “C” for Celsius), press

.

4. Continue.