Справочник Пользователя для Crane Merchandising Systems Hot Beverage Maker 670

6700001

Page - 49

November, 2002

1. Press 

  then  until the display shows one of the following:

OPT’N POSI.V:  The machine reverts to home switch operation of the ring

motors if the PosiVend™ system cannot operate normally because of
an obstruction in the cup station or for any other reason.

MUST POSI.V:  The vending machine is operational only if the PosiVend™

system is determined to be working.  Otherwise, the machine will go
temporarily out of service until the blockage or other error is corrected.

2. Press 

 to switch between the two choices.

3. Continue.

1. Press 

 then 

 until the display shows 

AJP.TMR XXM.

XX represents how many minutes PosiVend™ will be disabled for
either cup ring.  The same value applies to the two timers

       (one on each ring).
2. Enter a number using either keypad.

If any cup ring motor fails to deliver a cup on two consecutive at-
tempts, the cup ring goes out of service.  After the time set in step 2
has elapsed, the cup ring goes back in service and is given one
more chance to deliver a cup.  If cup delivery is again unsuccessful,
the ring goes out of service until the machine is serviced.  A suc-
cessful delivery on any cup ring will reset the failed attempts for that
particular cup ring.  If both cup rings perform three consecutive
failed attempts (and the PosiVend™ sensor is determined to be
working), the entire machine goes in the “mug only” mode until the
machine is serviced.  If either cup ring performs three consecutive
failed attempts with the other cup ring in anti-jackpot timer mode,
the entire machine will be in “mug only” mode (assuming PosiVend
is working) until the preset time elapses (one more attempt will be
made to deliver a cup) or the machine is serviced by a route
operator.