shake warning icon [H] is displayed on the screen. This indicates that there is a risk of
camera shake occurring. You should place the camera on a stable surface and use the
self-timer (Æ p.57) or, depending on the subject, use the flash.
( "Avoiding camera shake" Æ p.39, "Using the Flash" Æ p.60)

• After taking a shot, the warning LED flashes relatively slowly and the red and white flash

icon [F] blinks alternately on the screen while the flash is recharging. Wait for the
warning LED to go out and the flash icon to stop blinking before taking the next shot.
( "Using the Flash" Æ p.60)

• When the card access LED is blinking, data is being read from or written to the card. Do

not open the card/battery cover or remove the memory card while the LED is flashing as
this could cause data corruption or, in some cases, camera damage. Note that you can
still take pictures while the card access LED is flashing.