Справочник Пользователя для Follett VERSION 6.00
04/04
683
Appendix F Using a PHD Dolphin+
PHD Dolphin+ Main Menu
Battery Indicator.
A solid battery, or
one with a checkmark,
indicates a full charge.
Number-key mode Indicator.
Shows the current mode -
numeric or alpha.
There are two ways to return to the Main Menu:
Press the
ON SCAN
key when not in scanning mode.
Press the
BKSP
key repeatedly.
Procedures
In this section are the procedures, in abbreviated form, that you can perform
using the PHD Dolphin+.
Note:
Before performing any of these procedures, charge the PHD Dolphin+ in
the HomeBase for at least six hours, and erase any pre-existing scans from
the PHD Dolphin+.
Loading the PHD Dolphin+ application
On the computer:
1. Open System Setup | Setup | Site.
2. Click the PHD tab.
3. Select the PHD Dolphin+ radio button.
4. Check your PHD settings.
2. Click the PHD tab.
3. Select the PHD Dolphin+ radio button.
4. Check your PHD settings.
On the PHD Dolphin+:
5. Insert the PHD Dolphin+ into the HomeBase.
6. From the Main Menu, press
6. From the Main Menu, press
F4
-Setup.
7. Press
F3
-Update Software.
On the computer:
8. Click Load.
The application may take 4-5 minutes to fully load. Do not remove the PHD
Dolphin+ from the HomeBase until the Main Menu reappears.