Справочник Пользователя для Cirkuit Planet ICA-700-PA
POP before SMTP:
Select if POP before SMTP authentication is necessary when an
e-mail is sent.
POP server name:
It is necessary when the POP before SMTP is selected in
Authentication. Type the POP (receiving mail) server name up
to 64 characters, or type the IP address of the POP server. This
setting is necessary when the SMTP server which sends e-mails
performs authentication using the POP user account.
User name, Password:
Type the user name and Password of the user who has the mail
account. This setting is necessary when the SMTP server which
sends e-mails performs authentication.
Recipient e-mail address
Type the recipient e-Mail address up to 64 characters. You can
specify up to three recipient E-mail addresses.
Administrator e-mail
address
Type the Administrator e-Mail address up to 64 characters. This
address is used for reply mail and sending system messages
from the SMTP server.
Subject
Type the subject/title of the e-Mail up to 64 characters. With
respect to mail which is sent according to the alarm detection
when Alarm sending of the alarm tab is set to On, the
characters standing for the sensor type added to the subject.
Message
Type the text of the E-mail up to 384 characters. (A line break is
equivalent to 2 characters.)
Note:
When you set Authentication to On, be sure to select either or both SMTP or/and POP before
SMTP.
ICA-700 User Guide
56