Справочник Пользователя для FIC A360

Скачать
Страница из 187
 
Hardware Functional Overview 
and the R3 card support is fully compliant with the 2000 PC Card Standard CardBus 
specification. The OZ6933 is an additional buffer chip for the PC Card socket interface. In 
Addition, the OZ6933 supports dynamic PC Card hot insertion and removal, with auto 
configuration capabilities. 
 
The OZ6933 is fully complains with the 33Mhz PCI Bus specification, v2.2. It supports a 
master device with internal CardBus direct data transfer. The OZ6933 implements FIFO data 
buffer architecture between the PCI bus and CardBus socket interface to enhance data 
transfers to CardBus Devices. The bi-directional FIFO buffer permits the OZ6933 to accept 
data from a target bus (PCI or CardBus interface) while simultaneously transferring data. This 
architecture not only speeds up data transfers but also prevents system deadlocks. 
 
The OZ6933 is a PCMCIA R2/CardBus controller, providing the most advanced design 
flexibility for PC Cards that interface with advanced notebook designs.
 
 
FEATURES - Dual Slot Solution 
OZ6933
 
• 
Supports 2 PCMCIA 2.1 and JEIDA 4.2 R2 cards or 2 CardBus cards  
• 
ACPI-PCI Bus Power Management Interface Specification Rev 1.1 Compliant  
• 
Supports OnNow LAN wakeup, OnNow Ring Indicate, PCI CLKRUN#, PME#, and 
CardBus CCLKRUN#  
• 
Compliant with the 33Mhz PCI Specification V2.2, 2000 PC Card Standard 7.1 for 
OZ6933 
• 
Yenta™ PCI to PCMCIA CardBus Bridge register compatible  
• 
ExCA (Exchangeable Card Architecture) compatible registers map-able in memory 
and I/O space  
• 
Intel™ 82365SL PCIC Register Compatible  
• 
Supports PCMCIA_ATA Specification  
• 
Supports 5V/3.3V PC and 3.3V Cardbus cards  
• 
Supports two PC Card or CardBus slots with hot insertion and removal  
• 
Supports multiple FIFOs for PCI/CardBus data transfer  
• 
Supports Direct Memory Access for PC/PCI and PCI/Way on PC Card socket  
• 
Programmable interrupt protocol: PCI, PCI+ISA, PCI/Way, or PC/PCI interrupt 
signaling modes  
• 
Win'98 IRQ and PC-98/99 compliant  
• 
Parallel or Serial interface for socket power control devices including Micrel and TI  
• 
Integrated PC 98/99 -Subsystem Vendor ID support, with auto lock bit  
• 
LED Activity Pins  
 
4-12 
FIC A360 Service Manual