Справочник Пользователя для FIC M295
Software Functional Overview
3.9
Miscellaneous
3.9.1 Power Button
The system may have different action upon pressing the Power Button when the system is in
the different state.
the different state.
System Power State
Action for Pressing Power Button
Full-on Power
Off
Stand by
Power Off
STR
Resume from STR
STD
Resume from STD
SOff/MOff Power
On
3.9.2 Security
The user may enter up to 8 standard text characters for a password. The password includes
two levels. The higher priority is the Supervisor Password. The lower priority is the User
Password. The Supervisor Password can access all the system resource, while the User
Password may not access the floppy disk when it is protected by Supervisor Password. Also,
the User Password may not access the floppy disk when the Supervisor Password protects it.
When the security function is enabled, the system will request the user to enter password
during the following situation:
two levels. The higher priority is the Supervisor Password. The lower priority is the User
Password. The Supervisor Password can access all the system resource, while the User
Password may not access the floppy disk when it is protected by Supervisor Password. Also,
the User Password may not access the floppy disk when the Supervisor Password protects it.
When the security function is enabled, the system will request the user to enter password
during the following situation:
• Power On → The system will prompt the user to enter the password before booting
the OS. If the user key in the wrong password for 3 times, then the system will halt.
• Resume → The system will prompt the user to enter password while resuming from
STR or STD mode. If the user keys in the wrong password for 3 times, the system
will not resume and should return to Suspend mode.
will not resume and should return to Suspend mode.
• Entering CMOS Setup → The system will prompt the user to enter the password
before entering the CMOS Setup. If the user keys in the wrong password for 3 times,
then the system will halt.
then the system will halt.
3.10 CMOS Setup Utility
The Setup utility is used to configure the system. The Setup contains the information
regarding the hardware for boot purpose. The changed settings will take effect after the
system rebooted. Refer to Chapter 1 on running BIOS Setup Program for more detailed
information.
regarding the hardware for boot purpose. The changed settings will take effect after the
system rebooted. Refer to Chapter 1 on running BIOS Setup Program for more detailed
information.
3.11 Definitions of Terms
10Base-T (Ethernet) - A networking standard that supports data transfer rates up to
10Mbps (10 megabits per second).
100Base-T (Fast Ethernet) - A relatively new networking standard that supports data
transfer rates up to 100Mbps.
ACPI - Advanced Configuration and Power Management Interface, a power
management specification developed by Intel, Microsoft, and Toshiba.
CardBus - The 32-bit version of the PCMCIA PC Card standard. In addition to
3-44
FIC M295 / M296 Service Manual