Справочник Пользователя для Chip PC CDC01927
5
Jack PC Hardware User Manual - Training Department
Revision C 0506
Revision C 0506
1.1
Safety Instructions
If one of the following situations occurs, be sure to get the product checked by a qualified service
technician:
•
The product’s power supply is overheated, damaged, broken, causes smoke
or shortens the mains power socket.
or shortens the mains power socket.
•
Liquid penetrates the product case.
•
The product is exposed to excessive moisture or water.
•
The product has been mechanically damaged.
•
The product has obvious signs of breakage or internal loose parts.
•
In EU: Installation done not in accordance with EU required standards
•
In US: Installation done not in accordance with US required standards
.
Please read the following safety instructions carefully before using the product:
•
Be sure not to expose the product to excessive humidity.
•
When using an external power supply, place the DC power cord in such a way to
avoid people stepping on it.
avoid people stepping on it.
•
When using an external power supply, if the product is not used for a long period of
time, it is better to turn off the device by removing the power supply from the mains
socket.
time, it is better to turn off the device by removing the power supply from the mains
socket.
•
The product should be stored and used only in temperature and humidity controlled
environments as defined in the product environmental specifications.
environments as defined in the product environmental specifications.
•
When using an external power supply (5VDC AC/DC adapter) use only Chip PC-
supplied, UL-listed direct plug in AC/DC adapter (Chip PC part number: CPN1491 or
CPN1503 or CPN1504). Using a different power supply might expose the user to
various risks, damage the device and will void the product's warranty!
supplied, UL-listed direct plug in AC/DC adapter (Chip PC part number: CPN1491 or
CPN1503 or CPN1504). Using a different power supply might expose the user to
various risks, damage the device and will void the product's warranty!
•
The product is to be installed in compliance with the requirements of the Canadian
electrical Code (CEC) and the National Electrical Code in USA.
electrical Code (CEC) and the National Electrical Code in USA.