Справочник Пользователя для FANUC Robotics America GFK-1541B
TCP/IP Ethernet Communications for the Series 90™ PLC User's Manual
–
May 2002
GFK-1541B
B
AAUI Transceiver Information
Depending on your particular application, any of several types of user-supplied transceivers may
be used. Information on GE Fanuc transceivers as well as typical connection drawings for
10Base2 (thin wire) and 10Base-T (twisted pair) networks are shown in this section.
be used. Information on GE Fanuc transceivers as well as typical connection drawings for
10Base2 (thin wire) and 10Base-T (twisted pair) networks are shown in this section.
Note
Transceivers must be compatible with the IEEE 802.3 standard and must have
the SQE option Enabled.
the SQE option Enabled.
Caution
PLC power must be OFF when connecting or disconnecting the
transceiver.
transceiver.
GE Fanuc Transceivers
GE Fanuc Catalog
Number
Network Connection
Comments
IC649AEA102
10Base-T (RJ-45 connector)
Connects AAUI port to 10Base-T network.
IC649AEA103
10Base2 (BNC connector)
Connects AAUI port to 10Base2 network.
(Replaces obsolete IC649AEA101
transceiver.)
(Replaces obsolete IC649AEA101
transceiver.)
www.cadfamily.com EMail:cadserv21@hotmail.com
The document is for study only,if tort to your rights,please inform us,we will delete
The document is for study only,if tort to your rights,please inform us,we will delete