Справочник Пользователя для Carrier Access Network Device Axxius 800
Axxius 800 - Release 2.2
5-45
CLI Commands
delete
delete (router) remote
Use the delete (router) remote command to delete a remote WAN profile from the WAN
profile table on the specified Router card.
profile table on the specified Router card.
Syntax:
delete {rtr_card-addr} remote {"profile-name"}
Example:
delete 6 remote "Texas"
The example will delete a remote WAN named "Texas" from the WAN profile
table for the Router in slot 6.
table for the Router in slot 6.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{"profile-name"}
The name of the remote WAN profile to delete. This name must be enclosed in quotes, with
a maximum of 12 characters.
a maximum of 12 characters.
delete (router) snmp community
Use the delete (router) snmp community command to delete an SNMP community entry on
the specified Router card.
the specified Router card.
Syntax:
delete {rtr_card-addr} snmp community
{"community-name"} {ip-addr}
Example:
delete 2 snmp community "commune" 192.168.100.245
The example will delete the previously added SNMP community named
"commune" from the TSR in slot 2.
"commune" from the TSR in slot 2.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{"community-name"}
The name of an existing community with a maximum of 12 characters, enclosed in quotes.
{ip-addr}
The IP address of the host that can access the SNMP agent via this community, in the form
of xxx.xxx.xxx.xxx, where xxx is between 0-255. The address "0.0.0.0" allows any host.
of xxx.xxx.xxx.xxx, where xxx is between 0-255. The address "0.0.0.0" allows any host.