Инструкции Пользователя для Canon Microfilm Scanner 350

44

■ USER MODE ■

When the MS350 has not been operated for a specified length of
time, the scanner switches into standby mode and stops project-
ing the image on the screen to save power consumption.

 : Does not switch into the power saver mode.

 : Switches into the power saver mode if not operated more

than 15 minutes. (set at the factory before shipping)

 : Switches into the power saver mode if not operated more

than 60 minutes.

• Default of the power saver mode at factory shipping

is set to 

 so that the unit switches into the power

saver mode if not operated more than 15 minutes.

• The power saver mode can be canceled by any key

operation.

• When the FS Controller I and III is attached, the unit

cannot switch into the power saver mode.

This feature is available in the DMP mode and enables you to
speed up scanning by simplifying the startup operation.

 : Normal mode (set at the factory before shipping)

 : Hi-speed scanning mode

In the hi-speed scanning mode, the scanner delivers
printouts of the images upside down.

When using the DMP mode, you can select one of the following
scanning resolutions.

 : 600DPI

 : 300DPI (set at the factory before shipping)

In the case of 600DPI resolution, “Picture mode” is  dis-
abled even if selected. (

➞ P.40 “Setting the Print

mode”)