Справочник Пользователя для Azza AZZA Computer Hardware 810T

PnP/PCI Configuration

PNP OS Installed

[No]

Item Help

Reset Configuration

[Disabled]

Menu Level"

Resources Controlled

[Auto (ESCD)]

Default is Disabled. Select
E n a b l e d t o R e s e t
E x t e n d e d S y s t e m
Configuration Data

X IRQ Resources

Press Enter

X DMA Resources

Press Enter

X Memory Resources

Press Enter

PCI/VGA

Palette

[Disabled]

Assign IRQ For VGA

[Enabled]

Assign IRQ For USB

[Enabled]

Resources Controlled by

The Award Plug and Play BIOS has the capacity to automatically configure the
boot and Plug and Play compatible devices along with a Plug and Play operating
system such as WindowsÒ95. If you set this field to “manual”, you may manually
select specific resources in each of the sub menu.

IRQ/DMA/Memory Resources

When resources are controlled manually, you need to assign interrupt and DMA
type for the devices.

PCI/VGA Palette Snoop

Some display cards are non-standard VGA card (such as graphics accelerator or
MPEG Card) which may not display color properly on your screen. If you
encounter problem, select “Enable” may correct this problem. Leave it “Disabled”
as the default setting if you are using the normal display card.

Assign IRQ For VGA / USB

If you have VGA card installed that require IRQ signal, or you have the USB device
connected to the onboard USB port, then select “Enabled” in this field. Otherwise,
you may select “Disabled” so that the related IRQ will be released for other
devices.

BI
OS

BIOS Setup