Справочник Пользователя для Avaya 38DHB0002UKDD

Appendix D: Use Of The Serial Port 

Erasing/Re-Installing Operational Software - Page 131 

It may be necessary to carry out this procedure because the software is 
corrupted. 

Note:  A replacement copy of software is installed from the Manager PC via the 

LAN, so ensure that the PC is connected and the Manager is running. 

Proceed as Steps 1 and 2 above, type AT-X[Enter] and wait whilst the memory is 
erased and the new software loaded, as shown below. 

Replacing the Operational Software in Flash Memory 

Loader 1.1 DualFlash (2MB-2xF800 Flash-120nS DRAM-70nS EDO) 
AT 
OK 
AT-X 
Multi-Sector Erase 

OK 
Received BOOTP Response :C0.A8.2A.01 IPNC.bin 
TFTP Load Start 
TFTP Load complete 

Note: The command View/TFTP Log used immediately after the AT-X command 

shows the BootP request sent to the Manager and the progress of the 
download: 

: Received BOOTP request for 00e007000123 192.168.42.1 IPNC.bin 
: Sending BOOTP response for 00e007000123 192.168.42.1 IPNC.bin 
: Sending IPNC.bin length 654321 bytes to 192.168.42.1 

: Sent 10% of IPNC.bin 
: Sent 20% of IPNC.bin 
: Sent 30% of IPNC.bin 
: Sent 40% of IPNC.bin 
: Sent 50% of IPNC.bin 
: Sent 60% of IPNC.bin 
: Sent 70% of IPNC.bin 
: Sent 80% of IPNC.bin 
: Sent 90% of IPNC.bin 
: Sent 100% of IPNC.bin 
: Sent IPNC.bin length 654321 bytes 

INDeX IPNC Cassette Administration Manual 

Appendix D: Use Of The Serial Port - Page 131 

38DHB0002UKDD – Issue 7 (22/11/02) 

Erasing/Re-Installing Operational Software