Справочник Пользователя для Apple DualCam 640
The PC Setup icon has a red slash through it at startup.
If PC Setup doesn’t have enough memory to allocate to the PC environment at
startup time, it will turn itself off. Check the Memory control panel for disk
cache and RAM disk sizes; the disk cache should be set no higher than 128K,
and the RAM disk should be turned off (or have a small amount of memory
allocated to it). Restart the Macintosh if you change either of these settings.
startup time, it will turn itself off. Check the Memory control panel for disk
cache and RAM disk sizes; the disk cache should be set no higher than 128K,
and the RAM disk should be turned off (or have a small amount of memory
allocated to it). Restart the Macintosh if you change either of these settings.
If these steps don’t correct the problem, throw away the PC Setup Prefs file in
the Preferences folder within the System Folder and restart the Macintosh.
Then use the PC Setup control panel to recreate your settings.
the Preferences folder within the System Folder and restart the Macintosh.
Then use the PC Setup control panel to recreate your settings.
When you switch to the Mac OS from the PC environment, the following message
appears: “PC Clipboard requires additional system services in order to function. Please
ensure that the DOS-compatibility card is successfully installed.”
appears: “PC Clipboard requires additional system services in order to function. Please
ensure that the DOS-compatibility card is successfully installed.”
Macintosh Easy Open software is either not installed or has been turned off.
Turn on the Macintosh Easy Open control panel, or reinstall it using the DOS
Compatibility Installer program on the Macintosh Performa CD.
Turn on the Macintosh Easy Open control panel, or reinstall it using the DOS
Compatibility Installer program on the Macintosh Performa CD.
You set the DOS-compatibility card to use 4 MB (or more) of RAM, but you get an error
message saying that there’s not enough memory to run a PC application program.
message saying that there’s not enough memory to run a PC application program.
If you are sharing memory between the Macintosh and PC environments,
the Mac OS may be using some of the RAM you requested for the PC
environment. Turn off the RAM disk, if you’re using one, in the Memory
control panel; then restart the Macintosh.
the Mac OS may be using some of the RAM you requested for the PC
environment. Turn off the RAM disk, if you’re using one, in the Memory
control panel; then restart the Macintosh.
A PC program displays a message that it needs 540K to run, but you have 4 MB of
memory allocated to the PC environment.
memory allocated to the PC environment.
The message is referring to conventional memory. Most of the balance of
the 4 MB of memory you assigned to the PC environment is used by the
EMM386 memory management software. Configure your application program
to use more extended memory and less conventional memory. You may also
need to disable some device drivers or other software in your CONFIG.SYS
and AUTOEXEC.BAT files to free up more conventional memory. See the
section on managing memory in your DOS manual for more information.
the 4 MB of memory you assigned to the PC environment is used by the
EMM386 memory management software. Configure your application program
to use more extended memory and less conventional memory. You may also
need to disable some device drivers or other software in your CONFIG.SYS
and AUTOEXEC.BAT files to free up more conventional memory. See the
section on managing memory in your DOS manual for more information.
109
Troubleshooting in the PC Environment