Справочник Пользователя для Aluratek AIRMM02F
18
19
Manually configured as Wired Client Mode: (cont.)
8.
Go to next
screen
Notes
The device is in
wired client mode
now.
Screenshot
Instructions
9.
The device is
connected to
your network
Initial screen
1.
“OK” button or
press the right
rotary wheel.
Go to next
screen
Notes
Screenshot
Instructions
2.
3.
“►” button or
“OK” button or
press the right
rotary wheel.
Manually select
the AP mode.
4.
Select the DHCP
for auto configured
IP address.
5.
3.3 Configure as a Wireless Access Point (AP Mode)
AIRMM02F can also be configured as a wireless AP. With this feature, you
can easily extend the wireless coverage without purchasing another AP.
To configure AIRMM02F as an AP, you have to manually setup the de-
vice through selecting the MMI menu “Setup/Advanced Setup/Configure
Network/AP mode”. And then setup the IP address scheme, SSID, channel
number and the encryption key of the AP. Once the setting is finished, the
device will reboot automatically and function as an AP.
Manually configured as a Wireless Access Point (AP Mode):
“►” button or
“OK” button or
press the right
rotary wheel.
“►” button or
“OK” button or
press the right
rotary wheel.
“►” button or
“OK” button or
press the right
rotary wheel.
“▼” button
(1 times) or
rotate right
rotary wheel
clockwise.
“▼“ button
(4 times) or
rotate right
rotary wheel
clockwise.
“▼” button
(2 times) or
rotate right
rotary wheel
clockwise.
“▼” button
“▼” button
(1 times) or
rotate right
rotary wheel
clockwise.
Chapter 3: Configuration
Chapter 3: Configuration