Инструкции Пользователя для Alfa Romeo 147
GETTING TO KNOW YOUR CAR
114
There are also two levers on the steering
wheel spokes (
fig. 127) through which
it is possible to shift gear up or down (also
with the car stationary).
with the car stationary).
The gearbox can work in two operating
modes:
– the first is semiautomatic (then called
MANUAL), in which the driver directly re-
quests gearshifting through the lever on the
centre console or the levers on the steering
wheel spokes;
quests gearshifting through the lever on the
centre console or the levers on the steering
wheel spokes;
– the second i automatic, called
CITY
(mode selectable with the special button
B-
fig. 128, the word CITY is shown on the
display
display
fig. 130). With this mode the sys-
tem decides directly when to shift gear.
SELESPEED
TRANSMISSION
TRANSMISSION
(on request for versions/markets
where applicable)
where applicable)
The 2.0 T.SPARK version can be supplied
with a mechanical gearbox with electronic
control, called “Selespeed”.
control, called “Selespeed”.
The Selespeed considerably simplifies use
of the car, reducing the fatigue of city dri-
ving or when frequent gearshifting is re-
quired, at the same time offering brilliant
performance.
ving or when frequent gearshifting is re-
quired, at the same time offering brilliant
performance.
IMPORTANT To be able to use the Se-
lespeed correctly, this chapter should be read
in full to understand the correct, permissible
operations to be carried out right from the
start.
in full to understand the correct, permissible
operations to be carried out right from the
start.
This device comprises a conventional me-
chanical gearbox to which an electronical-
ly-operated electro-hydraulic device has been
added which automatically controls the
clutch and gear engagement. The clutch ped-
al has been eliminated and the car moves
off using only the accelerator pedal.
ly-operated electro-hydraulic device has been
added which automatically controls the
clutch and gear engagement. The clutch ped-
al has been eliminated and the car moves
off using only the accelerator pedal.
Gearshifting takes place through the con-
trol lever (
A-fig. 126) which is of the
floating type with a “single central stable
position”. Using the lever it is possible to re-
quest an increase/decrease of the gear ra-
tio engaged and/or reverse gear engage-
ment (
position”. Using the lever it is possible to re-
quest an increase/decrease of the gear ra-
tio engaged and/or reverse gear engage-
ment (
R) or neutral (N).
fig. 127
A0A1075m
fig. 128
A0A1121m
fig. 126
A0A0097m
110-185_Alfa147 Q2 GB 4-07-2008 12:02 Pagina 114