Справочник Пользователя для Agri-Fab 45-03085
10
TO REPLACE V-BELT
WARNING: Shut off (disengage) the Tine
Clutch Lever, the Tiller Engine and the Tractor
Engine before making any repairs.
Clutch Lever, the Tiller Engine and the Tractor
Engine before making any repairs.
Replace V-belt if it has been damaged considerably from
slipping under heavy loads or if it show cracks or frayed
edges. Refer to figures 12 and 13.
slipping under heavy loads or if it show cracks or frayed
edges. Refer to figures 12 and 13.
IMPORTANT: Do not move or remove the belt guide.
If the position of the belt guide is accidentally altered,
return it to the correct setting (6-1/2" above the tine shield
support plate).
If the position of the belt guide is accidentally altered,
return it to the correct setting (6-1/2" above the tine shield
support plate).
Remove the screw from the top of the belt guard.
•
Remove the hex nut from the rear of the guard.
•
Remove the belt guard to allow access to drive belt.
•
Disengage tine clutch lever and remove belt.
•
Reverse above procedures for installation of new belt.
•
SERVICE AND ADJUSTMENTS
FiGURE 12
FiGURE 13