Справочник Пользователя для Advantech Barcode Reader RS-485

ADAM-5000

               2-9

Chapter 2

Figure 2-6  ADAM-5000E Rail mounting

2.5

Wiring and Connections

This section provides basic information on wiring the power supply
and I/O units, and on connecting the network.

DC Power Supply Unit Wiring

Be sure that the DC power supply voltage remains within the allowed
fluctuation range of between 10 to 30 V

DC

. Terminals +V

S

 and GND are

for power supply wiring.

Note:  The wire(s) used should be at least 2mm

2

.