Справочник Пользователя для Digital Spectrum 1862-MF-61-7
Copyright© 2006 Digital Spectrum Solutions, Inc.
Page 38
11.5.7 Delete All Slides From Memory
Selecting this function will cause all stored images in the
MemoryFrame to be permanently deleted. One may wish to do this if
the goal is to subsequently fill the entire MemoryFrame from a
camera, thumb drive or card-reader.
MemoryFrame to be permanently deleted. One may wish to do this if
the goal is to subsequently fill the entire MemoryFrame from a
camera, thumb drive or card-reader.
11.5.8 Preferences
Selecting Preferences will display a sub-menu giving you the ability to
configure the following functions:
configure the following functions:
Figure 24 – Preferences Menu
11.5.9 Orientation: [Portrait or Landscape]
The stand on the back of the MemoryFrame is designed to support the
MemoryFrame in either the portrait (vertical) or the landscape
(horizontal) orientation. The default position is Landscape
(horizontal). After you stand the MemoryFrame into the desired
position, you will need to select the appropriate choice in the menu
option to match the orientation by pushing the Select button after
highlighting this menu option. Upon selection, the MemoryFrame
frame automatically rotates all menus and stored slideshow images
from horizontal to vertical or vice-versa.
The stand on the back of the MemoryFrame is designed to support the
MemoryFrame in either the portrait (vertical) or the landscape
(horizontal) orientation. The default position is Landscape
(horizontal). After you stand the MemoryFrame into the desired
position, you will need to select the appropriate choice in the menu
option to match the orientation by pushing the Select button after
highlighting this menu option. Upon selection, the MemoryFrame
frame automatically rotates all menus and stored slideshow images
from horizontal to vertical or vice-versa.
11.5.10 Display Slide Captions: [Enabled or Disabled]
This gives you the ability to enable or disable the display of the text
overlay (this text can only be created with the Digital PixMaster
application).
overlay (this text can only be created with the Digital PixMaster
application).
Copyright© 2006 Digital Spectrum Solutions, Inc.
Page 15
6.15
Transitions
A variety of slide transitions are available. These transitions are described
below. See Figure 10.
below. See Figure 10.
Figure 10 - Transitions
None: The image simply appears replacing the previous.
Wipe Down: The image wipes down from the top of the screen.
Wipe Right: The image wipes from the left of the screen towards the
right side.
right side.
Wipe Up: The image wipes up from the bottom of the screen.
Wipe Left: The image wipes from the right of the screen towards the
left side.
left side.
Box Out: The image appears from center in a small box and expands
towards the edges of the screen.
towards the edges of the screen.
Tile Fill Right: The old image is tiled over as the new image wipes in
from the left.
from the left.
Tile Fill Left: The old image is tiled over as the new image wipes in
from the right.
from the right.
Tile Box Out: The old image is tiled over as the next image appears
from center and expands towards edges to replace the previous.
from center and expands towards edges to replace the previous.
Diagonal Up: The image overwrites with diagonal stripes to replace
the previous.
the previous.
Diagonal Down: The image overwrites with diagonal stripes to
replace the previous.
replace the previous.
Random: The image overwrites with a different transition each time
through the slideshow.
through the slideshow.