Справочник Пользователя для Digidesign Control 24
Control|24 Guide
116
To open a the current controller focus plug-in
window:
window:
■
Press the unlit PLUG-IN switch.
To close the current controller focus plug-in
window:
window:
■
Press the lit PLUG-IN switch.
To close all open plug-in windows:
■
Press OPT(ALT)/ALL+PLUG-IN.
Plug-In Flip Mode
Plug-In Flip mode maps plug-in parameters to
the faders.
the faders.
The primary advantage to this is increased con-
trol, as afforded by the touch-sensitive, long-
throw faders on each channel.
trol, as afforded by the touch-sensitive, long-
throw faders on each channel.
To engage Plug-In Flip mode:
■
While in plug-in Parameters mode, press FLIP.
The faders take control of the parameters that
were controlled by each channel’s encoder knob
in regular Parameters mode.
were controlled by each channel’s encoder knob
in regular Parameters mode.
The encoder switches retain their previous func-
tionality from normal Parameters mode as pa-
rameter selection or bypass switches.
tionality from normal Parameters mode as pa-
rameter selection or bypass switches.
Press the flashing FLIP or ESC/CANCEL switches
to leave Plug-In Flip mode.
to leave Plug-In Flip mode.
To select a different plug-in page:
■
If flashing while in Plug-In Flip mode, press
the CHANNEL BAR SCROLL section switch la-
beled < MORE or MORE > to see the next bank of
parameters to the left or right, respectively.
beled < MORE or MORE > to see the next bank of
parameters to the left or right, respectively.
Plug-In Safe Mode
Pro Tools provides a Plug-In Safe mode to keep a
plug-in’s automation data from being overwrit-
ten.
plug-in’s automation data from being overwrit-
ten.
To enable or disable Plug-In Safe status for a plug-
in:
in:
1
Open a plug-in in Parameters view.
2
Press PLUG-IN SAFE.
The PLUG-IN SAFE switch LED will light to indi-
cate that the plug-in is protected from being
overwritten.
cate that the plug-in is protected from being
overwritten.