Справочник Пользователя для Digidesign Control 24

Groups and Automation Mode 
Assignment

As in Pro Tools, groups follow Automation 
mode assignments. 

To suppress Group behavior during automation 
assignment or editing:

■

Suspend all groups by pressing the SUSPEND 

switch (in the GROUPS section).

Recording Volume, Pan, or 
Mute Automation

To record automation on a track:

1  

Use the AUTOMATION ENABLE switches to 

make sure that VOLUME, PAN, or MUTE auto-
mation is globally record-enabled. 

2  

Choose an automation mode for the channel 

you wish to automate by doing one of the fol-
lowing:

• Pressing the channel’s AUTO switch to step 

through automation modes.

– or –

• Press the channel’s AUTO switch while 

pressing a master AUTOMATION MODE 
switch. 

3  

Press PLAY to begin automation recording.

4  

Adjust faders, pans or mute switches on the 

channels armed for automation recording. 

To arm or disarm the MASTER BYPASS function:

■

While pressing OPT(ALT)/ALL, press the MAS-

TER BYPASS switch in the CHANNEL BAR. 

The switch LED will either light solid, or flash, 
depending on which Automation mode has 
been set, and the CHANNEL BAR DISPLAY will 
briefly show “MBYP ON” or “MBYP OFF.”

Automating Switched Controls

Other discrete controls can also be automated. 
Discrete controls include any non-fader or ro-
tary control that toggles, such as in/out and 
on/off switches.

To arm or disarm discrete controls:

1  

Press the global AUTO/SELECT switch.

2  

Press the encoder switch that controls the pa-

rameter you want to automate to enable its au-
tomation. The Channel Bar display briefly reads 
“AUTO ON” or “AUTO OFF” and then returns to 
what it was previously displaying.

If automation data has been previously written 
and you attempt to disarm the relevant plug-in 
control, the channel scribble strips will display 
“Pro Tools has a Dialog on screen!” and a mes-
sage on-screen will alert you that automation 
data for the control will be lost if the control is 
disarmed. 

Press the ENTER switch on the numeric keypad 
or the RETURN key on your alpha-numeric key-
board to confirm this choice. Pressing one of the 
flashing ESC/CANCEL switches will cancel this 
operation. The scribble strips will revert to their 
prior behavior.