Справочник Пользователя для Digicom COMSPHERE 3911
Call Setup Branch
10-7
3910-A2-GN32-40
September 1998
Press the
key until Change_Directory appears. Press any function key to select
Change_Directory.
F1
01:551234
z
Nxt
"
#
F2
F3
The phone number listed in directory location 1 appears. Select Nxt to display other directory
locations.
locations.
Entering Telephone Numbers and Dial Command Modifiers into Directory Locations
The following example uses an empty directory location for describing how to enter a telephone
number. If you want to change an existing telephone number in any of the 24 directory locations,
follow the same procedures.
number. If you want to change an existing telephone number in any of the 24 directory locations,
follow the same procedures.
To add a telephone number to a directory location, make the following selections:
F1
02:
z
Nxt
"
#
F2
F3
Select Nxt until a blank directory appears on the LCD. (The cursor ( _ ) always appears in the
first character position.)
first character position.)
Select F2 (
" ) or F3 ( # ) until the desired character is selected. This can be an alpha or numeric
character.
F1
02:
z
Nxt
"
#
F2
F3
Press the
key to move the cursor to the next character position.
Continue this key sequence until the dial command modifiers and telephone number are entered.
(Refer to Table 10-1 for a list of valid dial command modifiers.)
(Refer to Table 10-1 for a list of valid dial command modifiers.)
F1
01:9W5556789
z
Nxt
"
#
F2
F3