Справочник Пользователя для Denso BHT-7000

104

If some error occurs when the power is turned on or during program execution, one of
the following error messages will appear on the LCD.

 ******************
 **  No System!  **
 ******************

  
  Battery voltage
        has lowered.

■ Problem

When the power is turned on or off or during ex-
ecution of program (System Mode or application),
the  battery  output  level  has  dropped  below  a
specified lower level limit.

If low battery is detected, the BHT-7000
displays this message for approx. 2 seconds
and beeps three times (for 0.1 second per
beep).  After that, it will resume previous
regular operation.

■ Solution

The service life of the battery cartridge will expire
soon, requiring replacement or recharge.

If the BHT-7000 is loaded with the rechargeable
battery  cartridge,  replace  or  charge  it.    (For  the
charging  procedure,  refer  to  Chapter  5,  Section
5.5.)

If the BHT-7000 is loaded with the dry battery car-
tridge, replace the dry cells.

■ Problem

A System Program error has occurred.

If this error occurs, the BHT-7000 beeps five
times (for 0.1 second per beep) and then turns
itself off.

■ Solution

Contact your nearest dealer.