Справочник Пользователя для Delta Tau TURBO CLIPPER DRIVE
Turbo Clipper Drive User Manual
Appendix B
84
E6: ADC Inputs Enable
E-Point
Description
Default
E6
Remove jumper to disable Option-12 ADC inputs, which is
necessary for reading current feedback signals from digital
amplifiers.
necessary for reading current feedback signals from digital
amplifiers.
Install Jumper to read ADC inputs (Only used when power board is
not present)
not present)
Not
Installed
E7
– E8: USB/Ethernet Reset Jumpers
E-Point
Description
Default
E7
Install E7 for normal operation (factory use only, do not remove)
Jumpered
E8
Install E8 to reload communication Boot/Firmware, or change IP
address.
address.
Remove E8 for normal operation.
Not
Installed
E10
– E12: Flash IC Jumpers
E Point
Description
Default
E10
E12
Remove E10, jumper E11, and E12 to read flash IC on power-
up/reset.
up/reset.
Other combinations are for factory use only.
E10 Not
Installed
Installed
E11-E12
Jumpered