Инструкция С Настройками для DeLonghi Gran Dama Avant ESAM 6700

Скачать
Страница из 25
17
6.   As soon as the coffee in the cup reaches the 
required  level,  press  the 
  icon.  Coffee 
delivery stops.
The machine is now reprogrammed with the new 
quantities.
hot WAtEr
preparation
 Important! Danger of burns. Never leave 
the  machine  unsupervised  while  delivering  hot 
water.  The hot water spout becomes hot while 
water is being delivered and must be held by the 
handle only.
1.  Make  sure  the  hot  water  spout  is  attached 
correctly (fig. 4).
2.   Place a container under the spout (as close 
as possible to avoid splashes). 
3  Press  the 
icon  (fig.  34).  The  message
“Rinsing” “Hot water...” is displayed. 
4.  Press the 
 icon to select the “Hot water...” 
function  (the  selected  message  flashes  on 
the  display)  and  confirm  the  selection  by
pressing the oK icon (or cancel the selection 
by pressing the ESC icon). 
5.  Water flows out of the spout. Delivery stops 
automatically after 8.5 oz (250ml). 
6.  To interrupt delivery of hot water manually, 
press the 
icon again.  
  Important!    You  should  not  deliver  hot 
water for more than two minutes at a time.
Changing the quantity
The appliance is factory preset to automatically 
deliver 8.5 oz (250ml). To modify these quantities, 
proceed as follows:
1.  Position a container under the spouts.
2.  Once  the  “Hot  water”  function  has  been 
selected, press and hold the OK icon  (about 8 
seconds) until “Hot water Program quantity” 
appears and the 
 icon flashes. 
•  When the hot water in the cup reaches the
required level, press the 
icon again.  
The machine is now reprogrammed with the new 
quantity.
CLEAnInG
Cleaning the coffee maker
The  following  parts  of  the  appliance  must  be 
cleaned regularly:
-  coffee grounds container (A18),
-   drip tray (A16),
-   water tank (A13),
-   coffee  spouts  (A20)  and  hot  water  nozzle 
(A11),
-   pre-ground coffee feed funnel (A8),
-   inside the machine, accessible after opening 
the service door (A19),
-   brew group (A12),
-   milk container (B)
-   control panel (C)
 Important! 
•  Do  not  use  solvents,  abrasive  detergents 
or alcohol to clean the coffee maker.  With 
De’Longhi  superautomatic  coffee  makers, 
you need not use chemical products to clean 
the  machine.  The  descaler  recommended 
by  De’Longhi  is  made  from  natural  and 
completely biodegradable substances. 
•  None of the components of the appliance can
be washed in a dishwasher with the exception 
of the milk container (B).
•  Do  not  use  metal  objects  to  remove
encrustations  or  coffee  deposits  as  they 
could scratch metal or plastic surfaces.
Cleaning the coffee grounds container
When  “EMPTY  GROUNDS  CONTAINER”  is 
displayed, the grounds container must be emptied 
and  cleaned.    Until  the  grounds  container  has 
been cleaned, the appliance continues to display 
the message and coffee cannot be made.
To clean:
•  open  the  service  door  on  the  front  of  the
appliance (fig. 35), extract the drip tray (fig.
36), empty and clean.
•  Empty  the  grounds  container    (A18)  and 
clean thoroughly to remove all residues left 
on the bottom. 
  Important!  when  removing  the  drip  tray, 
the grounds container must be emptied, even if 
it is not completely full.
If  this  is  not  done,  when  you  make  the  next 
coffees, the grounds container may fill up more
than expected and clog the machine.