Справочник Пользователя для Dekko 36B

Скачать
Страница из 21
Rev: 8/2008 
 
11 of 21 
36B, 36BX, 36H, 36HX, 52H, 52HX 
DEK
® 
is exclusively distributed by GXi International, LLC 
Heavy Duty Power Equipment 
On the 36” Honda powered models, there is one cable that func-
tions as a throttle cable, a choke activation cable, and operates a kill 
switch.  It is important that the cable be positioned correctly in the 
connector to permit all three functions.   
 
The throttle cable connector is located at the rear corner of the en-
gine.  Insert the throttle cable into the lower of the two holes, insert 
the cable into the cable clamp directly above the holes.  Adjust the 
throttle cable positioning in the clamp to allow the choke lever to 
activate when the throttle on the control panel is on the top position.  
To make this adjustment you may be required to secure and tighten 
the cable clamp a few times as you adjust the cable positioning and 
test for choke activation. 
 
On the 52 Hydro models powered by Honda there are separate 
throttle and choke cables. Both are connected in the front center of 
the engine. The throttle cable is connected to the top lever in the 
front hole. The choke cable is connected to the lower lever. See 
attached picture. Ensure that the cables are clamped to provide full 
travel for the levers on the control panel.  
 
 
WARNING:  FUEL LEAKS OR A LOOSE FUEL TANK OR A 
LOOSE FUEL VALVE CAN LEAD TO SEVERE INJURY OR 
DEATH.  ENSURE ALL CONNECTIONS ARE SECURE AND IN-
SPECT THOROUGHLY FOR ANY POTETIAL LEAKS IN THE 
FUEL SYSTEM.  IF YOU FIND A LOOSE CONNECTION OR A 
LEAK, MAKE AN IMMEDIATE REPAIR OR ASK FOR ASSI-
TANCE FROM A PROFESSIONAL MECHANIC OR SERVICE 
CENTER. 
 
DO NOT OPERATE THIS LAWN MOWER IF ANY COMPONENT 
OF THE FUEL SYSTEM IS LOOSE OR LEAKS GASOLINE! 
 
 
Locate the fuel tank on the fuel tank bracket and align the fuel valve 
in the center of the clearance hole.  Place the fuel tank straps into 
position, wrapping them around the tank and the bracket.  Note: the 
36B model has slots for the straps to feed through
.  Once the fuel 
tank and straps are in place, securely tighten the straps using the 
bolts provided.  Once secure, firmly attach the fuel line to the fuel 
valve nipple.  Ensure all connections are firm and secure.  Tighten 
as required to make sure the fuel system is tightly attached.
 
Assembly Instructions 
 
 
Step 4:  Throttle and Choke Cable Connections 
Step 5:  Fuel tank connections 
Throttle 
cable 
clamp 
Choke lever motion 
Throttle cable clamp 
 
Throttle cable connection 
 
Choke cable clamp 
 
Choke cable connection 
Right:  52” Mower Throttle 
and Choke Connections 
Above:  36” Honda Mower Throttle 
and Choke Connection