Справочник Пользователя для DAC Technologies GEN-X electronic flight bag P/N 1069-48XX-XX

Equipment Installation Manual, 
GEN-X Electronic Flight Bag 

 

 
1069-2510-01 D.doc

 

 

1069-2510-01 

Rev D 

Page 16 of 27

 

CONTINUED AIRWORTHINESS: 

This section provides data intended to assist the installer with establishing Instructions for Continued 
Airworthiness as required by FARs 23.1529, 25.1529, 27.1529 and 29.1529. 
 
 
1.  Maintenance Manual information for the GEN-X includes a system description, removal instructions, 

installation instructions and functional testing, which are all contained in the DAC International 
Installation Manual, 1069-2510-01 (this document). 

 
2.  Line replaceable unit (LRU) part numbers and other parts contained in the installation data package 

should be placed in the aircraft operator’s appropriate airplane Illustrated Parts Catalog (IPC). 

 
3.  Wiring diagram information contained in the installation data package should be placed in the aircraft 

operator’s appropriate airplane Wiring Diagram Manual. 

 
4.  Scheduled Maintenance Program tasks are as follows: 
 

a.  Recommended Periodic Scheduled Servicing ............................ Battery Replacement 
 
b. Recommended 

Periodic 

Scheduled Preventive  

 

Maintenance Tests....................................................................... With normal power  

 

 

applied to the Essential and Emergency busses, check the three indicator lamps on 

 

 

the RPU.  The Essential buss light and Emergency buss light are lit green and the 

 

 

Battery light is off.  If the Battery light is lit yellow the battery must be replaced.  

 

 

The battery is good for three years and is on condition. 

 
c.  Recommended Periodic Inspections ........................................... Battery status  indicator 
 

 

lamp inspection recommended every 300 hours.  Or, operators performing  

 

 

scheduled maintenance under a CAMP (Continuous Airworthiness Maintenance 

 

 

Program) shall determine a suitable interval for internal battery checks and  

  

replacement. 

 
d. Recommended 

Periodic 

Overhaul Period ................................... None Required 

 
e.  Special Inspection Requirements ................................................ None Required 
 

5. Application 

of 

Protective 

Treatments .................................................... None Required 

 
6.  Special Tools.......................................................................................... None Required