Инструкции Пользователя для BMW 2009 M5 Sedan

Driving

shift paddles, or selector lever, then the system
shifts into N.

Gear changes

Using selector lever

To upshift, pull the selector lever back.

To downshift, push the selector lever for-
ward.

Using shift paddles on steering wheel

To upshift, briefly pull the right shift
paddle +.

To downshift, briefly pull the left shift
paddle –.

Drivelogic

With Drivelogic various driving programs are
available to you.
Each time you change between the Sequential
mode and the Drive mode, the respective last
program is active. Exception: after the first
change from the Sequential to the Drive mode,
driving program 3 is active.

In Drive mode

There are five different driving programs, rang-
ing from relaxed 1 to sporty/highly dynamic 5.

In Sequential mode

You can choose from six driving programs rang-
ing from balanced/dynamic 1 to sporty/purist 6.
Program 6 is only available when the DSC
Dynamic Stability Control is deactivated, refer
to page

. If DSC is activated, the system

switches from program 6 to program 5

To maintain vehicle stability, always acti-
vate DSC whenever possible.

Selecting driving program with button
in center console

Press the button repeatedly until the desired
driving program is displayed in the instrument
cluster, refer to page

Selecting driving program via button

on steering wheel

You can also activate your preferred driving pro-
gram with the button on the steering wheel,
refer to MDrive on page

With the ignition switched on you can set
MDrive on the Control Display.
iDrive, for operating principle refer to page

Open the start menu.

Press the controller to open the menu.

Select "MDrive" and press the controller.

Select "SMG Drivelogic" and press the con-
troller. The first setting is selected.

Turn controller to set Drive mode or
Sequential mode.
"Unchanged" retains the current settings
made outside of MDrive.