Инструкции Пользователя для BMW 2009 X6 xDrive50i

 69

>

the vehicle is braked to a stop during driv-
ing.

In the instrument panel, the indicator 
lamp changes from green to red and 
the indication AUTO H goes out.
Indicator lamp on Canadian models.

Before you start to drive, either release the 
parking brake manually, refer to page

, or 

reactivate Automatic Hold, refer to page

.

Before leaving the vehicle with the engine 
running, shift the selector lever into posi-

tion P of the automatic transmission and make 
sure that the parking brake is set. Otherwise, 
the vehicle may begin to roll.

<

If the parking brake fails or malfunctions, secure 
the vehicle against rolling, e.g. with a wheel 
chock, if you leave the vehicle.

In the event of an electrical power loss or elec-
trical malfunction, you can release the parking 
brake manually.

Before manually releasing the parking 
brake and each time you park the vehicle 

without setting the parking brake, make sure 
that the automatic transmission is in position P, 
refer to page

. Be sure to pay attention to the 

information in the instrument panel. 
In addition, secure the vehicle against rolling, 
e.g. with a wheel chock. Otherwise there is a 
danger that the vehicle could roll if parked on a 
steep slope.

<

If it becomes necessary to also release the 
transmission lock of the automatic transmission 
manually, follow this sequence:

1.

If necessary, start by releasing the parking 
brake manually.

2.

Then release the automatic transmission's 
transmission lock manually, refer to 
page

.

Jump starting and towing, refer to information 
starting on page

.

1.

Open the left-hand side panel in the cargo 
bay.

2.

Remove the first-aid kit

and the warning 

triangle

if necessary. Close the bracket of 

the warning triangle.

3.

Insert the releasing tool, contained in the 
onboard tool kit under the floor panel, refer 
to page

, at the releasing point.

4.

Firmly pull the releasing tool upward against 
the mechanical resistance, refer to arrow, 
until a considerable increase in force is felt 
and the parking brake is then clearly heard 
to release.

5.

Stow the releasing tool, warning triangle

and first-aid kit

and close the left side 

panel in the cargo bay.

Only have a malfunction corrected by the 
nearest BMW Sports Activity Vehicle 

Center or a workshop that works in accordance 
with BMW guidelines and uses appropriately 
trained personnel. If the parking brake has been 
released manually in response to a malfunction, 
only technicians can return it to operation.

<

Following manual release, the actual sta-
tus of the parking brake may deviate from 

that displayed by the indicator lamp.

<

The parking brake can only be used again 
if it was manually released due to an inter-

ruption in the supply of electrical power. Other-
wise the operation of the parking brake is not 
ensured and there is a danger of the vehicle roll-
ing despite the parking brake being set.

<

Online Edition for Part no. 01 41 2 600 809 - © 09/08 BMW AG