Инструкции Пользователя для BMW 2009 M3 Sedan

 207

1 Sealant bottle and label with speed restric-

tion

2 Filling hose from sealant bottle to wheel

3 Connector and cable for the cigarette 

lighter socket/power socket

4 Holder for the sealant bottle
5 Compressor
6 On/off switch
7 Pressure gauge for displaying the tire infla-

tion pressure

8 Screw on pressure gauge to reduce tire 

inflation pressure

9 Hose to connect compressor and sealant 

bottle or compressor and wheel

The connector, cable and connection hose are 
stored in the compressor housing.

To repair a flat tire with the M Mobility System, 
proceed as follows:

>

Fill the sealant, refer to page

.

>

>

Produce the tire inflation pressure, refer to 
page

Strictly follow the specified sequence, 
otherwise the sealant may escape under 

high pressure.

<

1.

Shake the sealant bottle.

2.

Screw connection hose 

9 onto the connec-

tor of the sealant bottle.

3.

Ensure that screw 

8 on the pressure gauge 

is closed.

4.

Unscrew the dust cap from the valve of the 
defective wheel and screw filling hose 

2 of 

the sealant bottle onto the valve.

5.

Insert the sealant bottle into the housing of 
the compressor so that the bottle is upright.

6.

Ensure that the compressor is switched off, 
position 0.

7.

Insert connector 

3 into the cigarette lighter 

socket/power socket in the interior of the 
vehicle, refer to page

8.

With the ignition switched on: 
Switch on the compressor and let it run for 
approx. 3 minutes to fill the sealant. The 
inflation pressure of the tire after filling is 
unimportant.

9.

Switch off the compressor.

10.

Detach the hoses from the sealant bottle 
connector and from the tire valve.
Return the M Mobility System to its storage 
location in the vehicle.

Immediately drive approx. 2 miles/3 km to 
evenly distribute the sealant in the tire.

ba8_E90M3_cic.book  Seite 207  Dienstag, 19. August 2008  11:51 11

Online Edition for Part no. 01 41 2 600 934 - © 08/08 BMW AG