Инструкции Пользователя для BMW 2009 Z4 sDrive30i
Everything under control
76
Volume of the warning signals*
You can raise or lower the volume of the warn-
ing signals, e.g. the 'fasten safety belts'
reminder, relative to the entertainment sound
output. The warning signals have a fixed mini-
mum and maximum volume that cannot be
dropped below or exceeded.
ing signals, e.g. the 'fasten safety belts'
reminder, relative to the entertainment sound
output. The warning signals have a fixed mini-
mum and maximum volume that cannot be
dropped below or exceeded.
1.
"Settings"
2.
"Tone"
3.
"Volume settings"
>
"Speed volume": speed-dependent vol-
ume control
ume control
>
"PDC": volume of the PDC signal tone
relative to the entertainment sound
output
relative to the entertainment sound
output
>
"Gong": volume of the signal tone, e.g.
for the 'fasten safety belts' reminder, rel-
ative to the entertainment sound output
for the 'fasten safety belts' reminder, rel-
ative to the entertainment sound output
Brightness of Control Display
The brightness is automatically adapted to the
ambient lighting conditions. However, you can
change the basic setting while the low beams
are switched on.
iDrive, for operating principle refer to page
ambient lighting conditions. However, you can
change the basic setting while the low beams
are switched on.
iDrive, for operating principle refer to page
.
1.
"Settings"
2.
"Control display"
3.
"Brightness"
4.
Turn the controller until the desired setting
is selected.
is selected.
5.
Press the controller.
The setting is stored for the remote control cur-
rently in use. In bright conditions, for example,
the brightness control may not be clearly
visible.
rently in use. In bright conditions, for example,
the brightness control may not be clearly
visible.
Online Edition for Part no. 01 41 2 602 116 - © 01/09 BMW AG