Инструкции Пользователя для BMW 2009 328i xDrive Sports Wagon

60

1 Storing and maintaining speed or accelerat-

ing

2 Storing and maintaining speed or deceler-

ating

3 Deactivating cruise control
4 Resuming a speed stored beforehand

Tap the lever, arrow 

1, or pull it briefly, arrow 2.

The car's current speed is stored and main-
tained. It is displayed on the speedometer and 
briefly in the instrument cluster.
On uphill gradients, it may prove impossible to 
maintain the set speed if current engine power 
output is insufficient. If the engine braking 
effect is insufficient on downhill slopes, the sys-
tem will brake the vehicle slightly.

Repeatedly press the lever to the resistance 
point or beyond, arrow

1, until the desired 

speed is reached.

>

Each time the lever is pressed to the resis-
tance point, the desired speed is increased 
by approx. 1 mph or 1 km/h.

>

Each time the lever is pressed beyond the 
resistance point, the desired speed is 
increased by up to 5 mph or 10 km/h.

The system stores and maintains the speed.

Accelerating slightly:
Press the lever to the resistance point, arrow 

1, 

until the desired speed is reached.
Accelerating significantly:

Press the lever beyond the resistance point, 
arrow 

1, until the desired speed is reached.

The vehicle accelerates without pressure on 
the accelerator pedal. The system stores and 
maintains the speed.

Repeatedly pull the lever to the resistance point 
or beyond, arrow 

2, until the desired speed is 

displayed.

>

Each time the lever is pulled to the resis-
tance point, the desired speed is decreased 
by approx. 1 mph or 1 km/h.

>

Each time the lever is pulled beyond the 
resistance point, the desired speed is 
reduced by up to 5 mph or 10 km/h until the 
minimum speed of 20 mph or 30 km/h is 
achieved.

The system stores and maintains the speed.

Tap the lever upwards or downwards, arrow

3. 

The displays on the speedometer disappear.
In addition, the system is automatically deacti-
vated:

>

When you brake the vehicle

>

When you switch gears very slowly or shift 
to neutral in cars with a manual transmis-
sion

>

When you engage selector lever position N 
in cars with an automatic transmission

>

When you activate DTC or deactivate DSC

>

When DSC or ABS is intervening

Cruise control is not deactivated by depressing 
the accelerator pedal. Once the accelerator 
pedal is released, the stored speed is achieved 
again and maintained.

The warning lamp comes on when 
cruise control has been deactivated 
by applying the parking brake or as a 

result of DSC intervention. A message appears 
on the Control Display.

ba8_E9091_cic.book  Seite 60  Mittwoch, 29. Oktober 2008  2:59 14

Online Edition for Part no. 01 41 2 602 099 - © 10/08 BMW AG