Инструкции Пользователя для BMW 2007 328xi Sedan

 115

The rear seat backrest is divided. You can fold 
down either division in order to expand the 
cargo bay.

Reach into the recess and pull forwards.

When folding the backrest back up, make 
sure that the catch engages properly. If 

you cannot see a red warning area in the recess, 
the catch is properly engaged. Otherwise, 
cargo can be thrown around inside the passen-
ger compartment and endanger the car's occu-
pants, e.g. in the case of braking or sudden 
swerving.

<

Observe the instructions concerning the 
safety belt on page

 to ensure the best 

possible personal protection.

<

Do not let the partition net retract, other-
wise there is a risk of danger and the par-

tition net could be damaged.

<

Use the loop strap to pull the partition net out of 
the casing. Grip the bar on both ends and insert 
it into the retaining fixtures, arrow 

1. This can 

best be done from the rear seat.
When you no longer require the partition net, 
grip both ends of the bar and take it out of the 

retaining fixtures, arrow 

2. Let the partition net 

slide into the casing slowly.

1.

Fold down both rear seat backrests, refer to 
Expanding the cargo bay.

2.

Use the buttons to unlatch the casing on 
both sides, arrow 

1.

3.

Pull the casing out backwards, arrow 

2, 

without tilting it.

4.

Slide the casing into the guides on the 
backs of the seat backrests.

5.

Carefully pull out the partition net and insert 
it into the front retaining fixtures, refer to 
Partition net above. This can best be done 
from the front seat.

Follow the same steps in reverse order to return 
the partition net and seats to their original posi-
tions. Finally, slide the casing into both retaining 
fixtures on the sides until it engages. Tug on the 
casing to check if it is properly locked in place.

Online Edition for Part no. 01 41 0 012 928 - © 08/06 BMW AG