Инструкции Пользователя для BMW 2006 650i Coupe

198

The illustration shows the front left side of the 
engine compartment.

Bulb 55 watts, H 7

1.

Remove the cover cap

1 by pressing the tab 

and removing the cover cap upward.

2.

Press the bulb holder from above to release 
it.

3.

Remove the bulb holder.

4.

Remove and replace the bulb.

The lamp H7 is pressurized; wear eye 
protection and protective gloves. Other-

wise, there is the risk of bodily injury if the lamp 
is damaged.

<

Bulb 10 watts

Bulb holder and reflector are one unit and 
are replaced together.

<

1.

Turn the bulb holder

2 to the right and 

remove.

2.

Press the snap connection on the plug con-
nector, pull off the bulb holder and replace.

Your BMW is equipped with two turn signal 
lamps per side in the front.

Bulb 21 watts, WY 21 SV
The illustration shows the front right side of the 
engine compartment.

1.

Press the lever shown:

>

downward for the right turn signal

>

upward for the left turn signal

2.

Remove the bulb holder towards the rear.

3.

Remove and replace the bulb.

Bulb 21 watts, WY 21 SV
The bulb for the turn signal lamp 2 can be 
replaced via the wheel well.
The illustration shows the front left side of the 
vehicle.

1.

Turn the steering all the way to be able to 
remove the cover, refer to illustration.

2.

Turn off the light, switch off the ignition and 
remove the remote control from the ignition 
lock.

3.

Unscrew the two bolts using the open-end 
wrench from the onboard tool kit, refer to 
page

  Online Edition for Part-No. 01 41 0 159 709 © 09/05 BMW AG