Инструкции Пользователя для BMW 2005 X3 2.5i SAV

Скачать
Страница из 126
 39
Rain sensor*
The rain sensor automatically controls wiper 
operation as a function of the rain intensity. It is 
positioned on the windshield, directly in front of 
the inside rearview mirror.
Deactivate the rain sensor when passing 
through an automatic car wash. Failure to 
do so could result in damage caused by undes-
ired wiper activation.
<
Activating
As of ignition key position 1 move the lever to 
position
1. The wipers travel once across the 
windshield, regardless of the weather condi-
tions. 
You can leave the lever permanently in posi-
tion 
1 and then only need to activate the rain 
sensor as of ignition key position 1. To do so:
>
Briefly turn the serrated dial 
5 or
>
clean the windshield 
1, refer to next section
Adjusting sensitivity
Turn the serrated dial 
5.
Deactivating
Switch lever to position 
0.
Normal wiper speed
The system switches automatically to intermit-
tent mode when the vehicle is not moving, not 
on vehicles with rain sensor. 
Fast wipe 
The wipers operate at normal speed when the 
vehicle is not moving, not on vehicles with rain 
sensor. 
Cleaning windshield, rear window and 
headlamps* 
Wipers retracted
Cleaning windshield and headlamps
Rear window wiper intermittent mode
Cleaning rear window
Do not use the washers if there is any 
danger that the fluid will freeze on the 
windshield. If you do so, your vision could be 
obscured. To avoid freezing, use a washer fluid 
antifreeze, refer to page
Do not use the 
washers when the reservoir is empty. This 
could cause damage to the washer pump.
<
Cleaning windshield 
The system sprays washer fluid against the 
windshield and activates the wipers for a brief 
period. 
The windshield washer nozzles are automati-
cally heated as of ignition key position 2.
Cleaning headlamps*
When the vehicle lighting system is switched 
on, the headlamps are cleaned at regular and 
appropriate intervals.
Rear window wiper 
Rear window wiper in intermittent mode. When 
reverse gear is engaged, the wiper operates 
continuously.
You can also program the interval:
1.
Briefly move the wiper lever from position 
to position 
2.
2.
Wait for desired interval; maximum of 
30 seconds.
Online Edition for Part-No. 01 41 0 158 448 - © 09/04 BMW AG