Инструкции Пользователя для BMW 2005 330i Sedan
195
nal of the battery or to the engine or body
ground of the vehicle to be started.
ground of the vehicle to be started.
Starting the engine
1.
Start the engine of the donor vehicle and
allow it to run for a few minutes at an
increased idle speed.
allow it to run for a few minutes at an
increased idle speed.
2.
Start the engine on the other vehicle in the
usual way.
If the first start attempt is not successful,
wait a few minutes before another attempt
in order to allow the discharged battery to
recharge.
usual way.
If the first start attempt is not successful,
wait a few minutes before another attempt
in order to allow the discharged battery to
recharge.
3.
Let the engines run for a few minutes.
4.
Disconnect the jumper cables by reversing
the above connecting sequence.
the above connecting sequence.
If necessary, have your BMW center check and
recharge the battery.
recharge the battery.
Never use spray fluids to start the
engine.
engine.
<
Tow-starting, towing away
Always observe all applicable towing laws
and regulations.
and regulations.
<
Never allow passengers to ride in a towed
vehicle for any reason.
vehicle for any reason.
<
Using a tow fitting
The screw-in tow fitting must always be carried
on the car. It can be screwed in at the front or
rear of the BMW.
It is stored in the onboard tool kit underneath
the cover on the right-hand side of the luggage
compartment, refer to page
on the car. It can be screwed in at the front or
rear of the BMW.
It is stored in the onboard tool kit underneath
the cover on the right-hand side of the luggage
compartment, refer to page
.
In order to avoid damaging the tow fitting and
the vehicle, please follow these instructions:
use only the tow fitting provided with the vehi-
cle and screw it all the way in. Use the tow fitting
for towing only on roads. Avoid lateral loading of
the tow fitting, e.g. do not lift the vehicle by the
tow fitting.
the vehicle, please follow these instructions:
use only the tow fitting provided with the vehi-
cle and screw it all the way in. Use the tow fitting
for towing only on roads. Avoid lateral loading of
the tow fitting, e.g. do not lift the vehicle by the
tow fitting.
Access to screw thread
Rectangular cover panel in bumper:
Press on the upper edges of the cover panel.
Press on the upper edges of the cover panel.
Front
Rear
Being towed
Make sure that the ignition is switched on,
refer to page
refer to page
, as the low beams, tail
lamps, turn signals and windshield wipers
would no longer be available. If the electrical
system fails, do not attempt to tow away or tow-
start the vehicle. The electric steering wheel
lock cannot be disengaged and the car is not
steerable. Jump starting, refer to page
would no longer be available. If the electrical
system fails, do not attempt to tow away or tow-
start the vehicle. The electric steering wheel
lock cannot be disengaged and the car is not
steerable. Jump starting, refer to page
.
Power steering assistance is not available when
the engine is not running. Thus, braking and
steering will require increased effort.
the engine is not running. Thus, braking and
steering will require increased effort.
<
Switch on the hazard warning flashers, depend-
ing on local regulations.
ing on local regulations.
Vehicles with manual transmission
Gearshift lever in neutral position.
Online Edition for Part-No. 01 41 0 159 259 - © 03/05 BMW AG