Инструкции Пользователя для BMW 745i

 49

>

To lower: press the button, arrow  1, and 
push down the head restraint. 

To remove head restraints, refer to next 
column. 

If the head restraint has been low-
ered, pull it back up, continuing until 

the detent engages, before allowing a pas-
senger to ride in the rear center position. 
Failure to observe this precaution can 
reduce the level of occupant protection.

<

 

If necessary, adjust the head restraint's 
height to ensure that it is centered at 
roughly the height of the passenger's ears. 

With the safety switch pressed, refer 
to page 

, the height adjustment of 

the head restraints is deactivated.

<

 

The head restraints at the outer seating 
positions extend automatically whenever 
the system detects a passenger on the 
seat. You can also adjust the height of the 
head restraint electrically.

To prevent possible personal injury 
and property damage, always ensure 

that the area above the head restraints is 
clear and unobstructed before extending 
them upward.

<

 

1.

Pull the head restraint upward to the 
stop 

2.

Press the button, arrow 1, and remove 
the head restraint. 

1.

Press the button, arrow 1, and slide the 
head restraint into its support 

2.

Adjust the head restraint for your 
personal comfort. 

If necessary, adjust the head restraint's 
height to ensure that it is centered at 
roughly the height of the passenger's ears. 

With the safety switch pressed, refer 
to page 

the head restraints is deactivated.

<

 

The head restraints at the outer seating 
positions extend automatically whenever 
the system detects a passenger on the 
seat. You can also adjust the height of the 
head restraint electrically.

To prevent possible personal injury 
and property damage, always ensure 

that the area above the head restraints is 
clear and unobstructed before extending 
them upward.

<

 

Online Edition for Part No. 01 41 0 157 197 - © 11/02 BMW AG